|
|
PCCard
![[PCCard]](t2832_files/PCCARDKombi.jpg)
PC/104-Plus PCMCIA PC Card
Adapters
The PCCARD is a PC/104-Plus
interface adapter that provides the 8/16 bit
PC Card™ and 32 bit CardBus™ functionality to your
system.
PCCARD offers two independent
PC Card™ standard slots that are
backwards compatible with the PCMCIA standard. So PCCARD gives you
access to
the wide spread CardBus™, PC Card™ or PCMCIA Cards.
Through the
huge functionality these cards offer your system gain in a maximum
flexibility. PCCARD is available as PC/104-Plus module or in a special
MPL
form factor used for the MPL
industrial PIP-PC
line.
PCCard Features
- Two PC Card Standard slots
for dual type I/II or single type III
card
- 3.3V and 5V cards supported
- 32 bit CardBus™
interface
- 8/16 bit PC Card™
interface
- PCMCIA PC Card™
compatible
- Hot plug capable
- PC/104 -Plus stackthrough
module
- Runs with 5V input power only
- Fits in all PIP s
Those features make
PCCARD to the ideal, industrial
solution if you need to expand your system
with a compact, reliable interface that gives you maximum flexibility.
PCCARD
connects your system to any available CardBus™, PC
Card™ or
PCMCIA-Card. This allows you for example to expand your system by
removable
memory and/or I/O cards (Flash Disks, Ethernet, FireWire, Modem, and
more).
Technical Features
| PC/104-Plus
Interface |
| Bus Interface |
33MHz clock, 32Bit wide |
PC/104-Plus compliant
PCI specification revision 2.2 compliant |
| Interface Voltage |
3.3V and 5V interface |
Version with internal
3.3V power supply available |
| Interrupts |
Parallel PCI and ISA
interrupts supported |
|
| PC Card
Interface |
| Card Types supported |
3.3V and 5V, 8 bit or 16
bit PC-Cards
32bit CardBus Cards |
|
| Card Slots |
2 independent, short
circuit protected slots |
|
| Controller |
TI PCI1520 CardBus
Controller |
Optional ZV-Port support |
| Physical/Power |
| Power |
+5VDC and/or 3.3VDC +/-5% |
input over PCI connector
5V only version available |
| Programming voltage |
12V Programming voltage
supply over PC/104-Plus connector |
If required by the
PC-Card |
| Maximum Power consumption |
max. 1 Amp supply voltage
max. 100 mAmp programming voltage |
|
| Temperature Range |
0°C up to
70°C |
|
| Humidity |
10% - 90% non condensing |
|
| Operating Sytems |
- Microsoft Windows NT
4.0 (Using CardWizard
from SystemSoft
Inc. or CardWare from APSoft)
- Microsoft Windows 98,
ME, 2000 (Generic driver support)
- Microsoft Windows XP
(Native driver)
- Microsoft Windows CE
- Linux (Yenta socket
driver)
|
| PCCard Versions |
| PCCard-M |
Special form
factor for use with a MPL PIP, without ZV and 3.3V
switcher |
| PCCard-P |
PC/104-Plus form
factor for all PC/104-Plus compatible PCs, without
ZV |
| For
further customer specific versions please contact
MPL. |
|
Information contained
in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of
their respective companies or mark holders.
|