|
|
IDE2CF
![[IDE2CF]](t2834_files/IDE2xyKombi.jpg)
Compact Flash Connector
The IDE2CF adapters are cost effective and easy to use adapters for
connecting CompactFlash cards to the standard IDE port of your system. The
adapters are build up in PC/104 form factor for an easy mechanical fastening.
An optional stackthrough PC/104 connector for installing additional PC/104
cards is available. The adapters are electrically linked to the IDE port via
standard IDE cable either, over the 44- pin 2 mm pitch or, the 40-pin 2.54 mm
pitch header. The IDE2CF adapter has 1 CompactFlash slot, fitting type I and
II cards. So on the adapter any CompactFlash Storage Card can be used.
With the IDE2CF adapter the storage cards are used like IDE hard disks,
they are not hot plug capable. If you require hot plugging support, use the
PCCARD Module of MPL AG.
IDE2CF Features
- Bootable storage interfaces
- Master/Slave selection
- 44 or 40-pin IDE interface
- PC/104 form factor
- CF-Cards type I & II
Technical Features
| Technical
features |
| Card Types supported |
CompactFlash Storage Cards type I and II |
Use the PCCARD Module of MPL AG for other card
types! |
| Interface Voltage |
5V only |
|
| Physical/Power |
| Power |
+5VDC +/-5% |
Either via 44-pin IDE connector or through PC/104 connector |
| Temperature Range |
0°C up to 70°C |
|
| Humidity |
10% - 90% non condensing |
|
| Operating Sytems |
| All Operating Systems that support IDE media will work with
the IDE2CF. However, please not that Hot-Plug support for standard IDE media
is not supported by most operating systems. |
| IDE2CF Versions |
| IDE2CF-[Slots][PC/104
Connector][IDE Connector] |
| Slots: |
| 1 |
Single CompactFlash Slot |
| PC/104 Connector: |
| A |
PC/104 stack-through connector assembled |
| N |
No PC/104 stack-through connector |
| IDE Connector: |
| 40 |
40-pin, 2.54 mm pitch IDE connector assembled |
| 44 |
44-pin, 2 mm pitch IDE connector assembled |
|
Example: IDE2CF-1N40
- Single Slot
- No PC/104 connector
- 40-pin IDE connector
|
|
| For further customer specific versions please contact
MPL. |
Information contained
in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of
their respective companies or mark holders.
|