TERM50
![[TERM50]](t2862_files/term50.jpg)
High Pin Count I/O Interconnection Board
The TERM50 is an interconnection board that eases connection to high I/O
count peripheral boards. Its primary intention is to support I/O connection
to the MPL PIP series of industrial PC products. Typically PC/104 peripheral
boards present their I/O's on two standard raw 0.1 in pin headers up to a
total pin count of 50. MPL AG brings these I/O signals to a mini Dsub
connector on the PIP front through an adapter cable. The TERM50 allows the
translation from mini Dsub to individual screw terminals and presents
additional screw terminals for shield connections.
Technical Data
| Electrical
Characteristics |
| Current Rating |
500 mArmsper Line
1 Apeakper Line |
| Voltage Rating |
30 VDC line to line and line to shield |
| Mechanical
Characteristics |
| Module Size |
160 x 70 x 17 mm (excluding mechanical fixtures |
| Connector/Screw
Terminals |
| I/O-connector |
Mini Dsub 50 female with latch |
| Screw terminals |
3.81 mm spacing
Applicable wire size 0.14-1 mm2 (AWG 26-16) |
Information contained
in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of
their respective companies or mark holders.
|