PATI

PC/104 PowerPC controlled Analog and Timing I/O Intelligence (PATI)

The PATI is a highly integrated I/O Board in PC/104 form factor. Build around the MPC555 Motorola PowerPC^TM Processor and the PLX9056 PCI Bridge it brings the superb MPC555 peripherals to a standard PCI Interface.

With the possibilities for firmware update over the PCI bus, parameter passing via the on-board SDRAM, allowing the PATI to access the host memory via PCI busmaster access and various configurations options it is well suited for fast prototyping application.

A stand-alone mode allows the PATI to work without the host. Application developped and tested in a host environment can be executed on the PATI in the stand-alone mode without any code modification.

The MPC555 peripherals are available on 2 standard 50 pin 2.54 mm header which offers easy connections. It features 8 differential 10bit Analog/Digital channels, 32bit TPU channels, 2 serial interfaces and 2 CAN interfaces

PATI Features

• Motorola MPC555 PowerPC^TM Processor
• 40MHz Processor Clock
• 16MByte SDRAM on-board
• up to 8MByte on-board Flash
• 32bit 33MHz PCI Agent Interface
• Bus Master capable
• Low power consumption
• 5V only Power Supply
• 8 differentials 10bit Analog/Digital converter channels
• 32Bit TPU channels
• 2 Serial Interface
• 2 CAN Interface

Specifications

Information contained in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.